Arrma Mojave 6S Grill Kit
Part Number: MS1949
Want to add a cutout in the grill or just make the front of your body shell look even cooler? Then this Grill Kit is the perfect add-on for your truck! You can even still use the stock bumper bar. The Grill is flexible and sits perfectly flush to the body once installed. The included stainless-steel hardware also adds a clean, detailed look to the body.
First, remove the bumper bar and set it to the side. (If you are wanting to cutout a section of the body under the grill, please wait to do so till after you drill all the mounting holes) Now line up the Grill to the body and drill out the first hole; (preferably in a corner) tighten the grill to the body with a bolt and move on to the opposite corner hole. (Don’t forget to put the included inner grill piece between the body shell and the lock nut.) Continue a staggered pattern around the grill for the best results. If you want to add a cutout in the body, it is best to do so now. Remove the Grill and use the drilled holes as a guideline for your cutout. Cut to the inside of the mounting holes in whatever shape you want. (Don’t cut too close to the holes! Leave a few mm between them and your cutout so you don’t risk the holes tearing.)
Once you are done, mount the bumper bar back on the body without the stock plastic spacers.
And you're done, enjoy the new look!
Includes All Required Stainless Steel Hardware
Colors Available:
Black, Red, Blue, Green, Orange, White
Compatible With:
Stock Mojave 6S Style Body
Check out the rest of my shop to find more R/C related products! Made with top quality materials that will last through your hardest bash sessions!
Made in the USA!
Arrma Mojave 6S Grill Kit
Part Number: MS1949
Want to add a cutout in the grill or just make the front of your body shell look even cooler? Then this Grill Kit is the perfect add-on for your truck! You can even still use the stock bumper bar. The Grill is flexible and sits perfectly flush to the body once installed. The included stainless-steel hardware also adds a clean, detailed look to the body.
First, remove the bumper bar and set it to the side. (If you are wanting to cutout a section of the body under the grill, please wait to do so till after you drill all the mounting holes) Now line up the Grill to the body and drill out the first hole; (preferably in a corner) tighten the grill to the body with a bolt and move on to the opposite corner hole. (Don’t forget to put the included inner grill piece between the body shell and the lock nut.) Continue a staggered pattern around the grill for the best results. If you want to add a cutout in the body, it is best to do so now. Remove the Grill and use the drilled holes as a guideline for your cutout. Cut to the inside of the mounting holes in whatever shape you want. (Don’t cut too close to the holes! Leave a few mm between them and your cutout so you don’t risk the holes tearing.)
Once you are done, mount the bumper bar back on the body without the stock plastic spacers.
And you're done, enjoy the new look!
Includes All Required Stainless Steel Hardware
Colors Available:
Black, Red, Blue, Green, Orange, White
Compatible With:
Stock Mojave 6S Style Body
Check out the rest of my shop to find more R/C related products! Made with top quality materials that will last through your hardest bash sessions!
Made in the USA!
