This is a Servo Mount so you can fit a full size 1/10th scale servo in the Mini Kraton 3S PowerBeeRC chassis!
Heatsets are pre-installed and the kit includes the necessary (4) M3 bolts to mount the servo to the adaptor.
You will need:
(2) M3×10mm Countersink Screws
(These are used to bolt down the mount to the chassis)
(Working on getting these two countersunk screws brought into stock and included in the kit. But, in the meantime, if this message is here then they are not included yet.)
Colors Available:
Black, Red, Blue, Green, Orange and White
This design is by Ryan Courts over at PowerBeeRC and with our continued partnership, he asked us to start making these and distributing them directly to folks! We of course, were happy to help out and relieve him of having to make these. Now the mad scientist can spend even more time designing new creations in his lab!
-Part Details and Installation Info-
Tested on 3 full size servos. Guaranteed to fit almost all servos (but maybe you have a weird one). Servo horn hook up is on you. You’ll need to drill the bottom two holes on the chassis to allow the 3mm screws to fit.
This kit includes the (4) M3 bolts to mount the servo to the adaptor but you will need (1) M3×12mm and (1) M3×20mm Countersunk screws to mount the adaptor to the chassis.
This design is by Ryan Courts over at PowerBeeRC and with our continued partnership, he asked us to start making these and distributing them directly to folks! We of course, were happy to help out and relieve him of having to make these. Now the mad scientist can spend even more time designing new creations in his lab!
Send a Big Thank you to Ryan Courts for partnering with us and making it easier for folks to get their hands on these!
If you want to support him and his amazing projects, go check out his site:
Power Bee RC
If you want to grab any more Mini Kraton parts and upgrades check out our whole line of products:
Mini Kraton 3S — Store — MJM3DSolutions
This is a Servo Mount so you can fit a full size 1/10th scale servo in the Mini Kraton 3S PowerBeeRC chassis!
Heatsets are pre-installed and the kit includes the necessary (4) M3 bolts to mount the servo to the adaptor.
You will need:
(2) M3×10mm Countersink Screws
(These are used to bolt down the mount to the chassis)
(Working on getting these two countersunk screws brought into stock and included in the kit. But, in the meantime, if this message is here then they are not included yet.)
Colors Available:
Black, Red, Blue, Green, Orange and White
This design is by Ryan Courts over at PowerBeeRC and with our continued partnership, he asked us to start making these and distributing them directly to folks! We of course, were happy to help out and relieve him of having to make these. Now the mad scientist can spend even more time designing new creations in his lab!
-Part Details and Installation Info-
Tested on 3 full size servos. Guaranteed to fit almost all servos (but maybe you have a weird one). Servo horn hook up is on you. You’ll need to drill the bottom two holes on the chassis to allow the 3mm screws to fit.
This kit includes the (4) M3 bolts to mount the servo to the adaptor but you will need (1) M3×12mm and (1) M3×20mm Countersunk screws to mount the adaptor to the chassis.
This design is by Ryan Courts over at PowerBeeRC and with our continued partnership, he asked us to start making these and distributing them directly to folks! We of course, were happy to help out and relieve him of having to make these. Now the mad scientist can spend even more time designing new creations in his lab!
Send a Big Thank you to Ryan Courts for partnering with us and making it easier for folks to get their hands on these!
If you want to support him and his amazing projects, go check out his site:
Power Bee RC
If you want to grab any more Mini Kraton parts and upgrades check out our whole line of products:
Mini Kraton 3S — Store — MJM3DSolutions
